Once dry and lightly sanded, the jointed surface is smooth and ready for primer/paint.
Dries slowly and evenly to avoid shrinkage or joint cracking over time.
Engineered for Buildwell Gypsum Boards — and works equally well with all square/tapered edge boards.
Covers indentations, screw marks, and edge flaws in a single pass.
Covers indentations, screw marks, and edge flaws in a single pass.
Buildwell vs Local Joint Fillers
| Feature | Local Fillers | Buildwell Jointing Compound |
|---|---|---|
| Spreadability | ❌ Thick, uneven | ✅ Smooth, consistent |
| Crack Resistance | ❌ May shrink | ✅ Low-shrink formula |
| Adhesion to Board Edges | ❌ Weak edge hold | ✅ Strong bond with edge paper |
| Finish Quality | ❌ Needs sanding twice | ✅ Sand once, then paint |
| Ceiling Suitability | ❌ Sags overhead | ✅ Ceiling-grade grip |
Technical Specifications
| Property | Specification |
|---|---|
| Form | Ready-mix paste |
| Application | Hand trowel or broad knife |
| Drying Time | 45–90 mins (site conditions vary) |
| Finish | Ultra-smooth white |
| Compatibility | Gypsum boards, screw spots, paper tape |
| Shrinkage | Minimal |
| Curing Requirement | No post-curing needed |
| Packaging | Bucket (sizes as per site requirement) |
| Shelf Life | 12 months (in sealed container) |
Choosing the Best Jointing Compound for Ceiling Gypsum Boards in India
🔹 Why Jointing Matters in Ceilings
Even the best gypsum board ceiling is only as good as the jointing quality. Improper joint compounds cause:
- Visible joint lines after painting
- Hairline cracks in corners
- Flaky edges or screw pops over time
What is the best jointing compound for gypsum board ceilings in India?
Buildwell Jointing Compound — designed for ceiling joints, screw heads, and finish-level surface prep.
Do I need to mix it with water?
No — it’s a ready-to-use paste. Just stir and apply.
Is sanding required after it dries?
Yes — light sanding for a smooth, paint-ready finish.
Does it crack after drying?
No — Buildwell compound is formulated to dry without shrinkage or cracking.
What type of paint can be used on top?
Any ceiling primer and emulsion — apply 6–8 hrs after sanding.
How do I apply Buildwell joint compound?
Use a trowel to fill joints, embed joint tape, and level edges in two coats.
Can it be used on screw heads?
Absolutely — ideal for concealing screw spots and tool marks.
Can homeowners use this for DIY ceiling repair?
Yes — easy to apply and smooth, great for DIY gypsum ceiling touch-ups.
Where to buy Buildwell Jointing Compound?
Available pan-India through Buildwell dealers or buildwell.in.
How long does it take to dry?
Around 45–90 minutes depending on ventilation and coat thickness.
Office
Street Number 15, Madhu Vihar, I.P. Extension, Patparganj, Delhi - 110092
Toll-Free Number
1800 102 8031
Email Address
info@buildwell.in